Tenterden Terrier

Stephens’ Other Railmotors

The WC&P’s Drewrys

Click on the images to see the larger pictures

Much attention is always directed in the Stephens’ cannon to the back to back railmotors derived from Ford and Shefflex road vehicles. Although sometimes granted pioneering status they are often derided for faults of passenger comfort that originated in their lightweight, road based construction. Interesting as these railmotors are they were to some extent forced on Stephens by cheapness of first cost and availability of spares. However Stephens’ first effort at a petrol railmotor came from a very different, railway based, tradition was very successful and eventually led to the purchase of a second hand railmotor from the same source. Neither of these railmotors attracted the interest of the later motors perhaps because Stephens did not make wider use of Drewry cars, probably on the grounds of first and spares costs, and their success has consequently been unfairly overlooked.

The Drewry Company (it had various legal titles over the years) was a pioneer design and sales company for lightweight railway vehicles which used a variety of companies, principally the Baguley companies, over the years to construct its designs. Drewry was particularly successful in selling lightweight and fairly reliable petrol trolleys from the Edwardian period and produced a standard range. By the end of WW1 they had moved into producing larger machines of greater than 20 hp using Baguley engineering and expertise. Stephens was an early customer, having somehow inveigled the neccessary money from the receivers of the Weston, Clevedon and Portishead, ordering a railmotor on 15th February 1921.

The Small Drewry

 Works Photo of Small RailmotorThe new railmotor, nominally a Drewry, was constructed by Baguley and carried their works number 1252. Recorded by some sources as delivered in October 1921, works records show it as actually delivered in April 1922. This disparity may be explained by a peculiarity of the order that the car had to be approved on its completion by the Engineer of the Royal Automobile Club or his deputy – a condition certainly imposed by Stephens to cover his lack of internal combustion expertise by using friends at his usual London luncheon venue. And it may well have been wise and fruitful, for works records show that the Railmotor was modified to comply with ‘regulations for petrol cars in public service’.

The railmotor was based on largely standard mechanical parts with a water-cooled Baguley engine which had four cylinders, each with a bore of 4" and stroke of 5". It was capable of developing 25 hp, having a three-speed gear with the final drive by inverted tooth chain to one of the axles. Reverse gear gave all three speeds and there were controls at each end, although the brake and gear levers had to be removed from the cups into which they fitted. The four wheels were 2' in diameter and were of chilled iron, as opposed to the normal steel, by British Griffin. The wheelbase was a little longer than customary at 108 inches, the weight only six tons and the maximum speed about 25 mph on the level. The petrol consumption was stated by the makers to be 16 mpg 'on easy grades', which worked out at a running cost of about 6d per train mile.

The body was an enclosed (unusual till then) ‘tramcar’, which was 19' long and 8' wide; was of three-ply wood panelling covered with thin steel sheeting; and the windows were of the 'drop' variety. There was a centre gangway with wooden-slat seats on either side which gave accommodation for thirty persons, and there was room for another twelve standing. Lighting was by acetylene but electric lights seem to have been provided by 1927. Doors were on either side at each end, with steps to give access from track level. The roof, which was only 8' 3" from rail level (making it much lower than a normal railway carriage), was railed around so that luggage could be carried on it; access was by a ladder at each end, a virtually unused feature it shared with Stephens later railmotors. The vehicle had the normal Drewry inside suspension but, unusually, full standard gauge pattern buffing and draw gear which emphasised the low height of such cars. Originally the petrol tank was inside the car body, but for safety reasons was later replaced by a horizontal cylinder above one buffer-beam. The exhaust-pipe rose to above roof-level and there was a whistle hinged to it and held at an angle by means of a spring. This was operated by pulling a wire inside the car which effectively joined the whistle to the end of the exhaust-pipe.

The railmotor was painted in what was the probable standard Drewry livery of dark green with yellow lining and on delivery had the company's title in a smart garter on the sides. In the 1930s this was replaced by the initials 'WC & PR'.

A very similar car was later supplied by Drewry in 1927 to the Eten Railway in distant Peru.

Limited seating for other than the quietest days was soon apparent and to give the railmotor more versatility extra capacity was needed.  A photograph shows 1252 coupled to the former Metropolitan Railway four- wheeled coach, number 7 that the WC&P used as a spare for its usual fixed sets. This was a not a practical arrangement and it is highly unlikely that it was used in public service for the Drewry, which was too light to have braked the heavier coach (c10 tons) as it did not have continuous brakes.

A purpose built ‘tramcar’ trailer was therefore ordered from Drewry in November 1922 and delivered in March 1923 and the two worked happily together without continuous brakes. Described by its builders as  ‘enclosed’ it  was in fact of a semi enclosed type with open sides protected by  waterproof curtains and seated 24, a figure which seems often to have been exceeded at peak times. Curtains proving inadequate, the opening side were filled and side windows provided sometime after 1929. Like the railmotor, the trailer was painted green with yellow lettering, but by the closure was in plain dark green. After withdrawal the body is reported to have become a summerhouse in a garden at Chiseldon, near Swindon.

 Small Railmotor with trailer as fitted with windows Later it became apparent that the addition of a goods trailer would enable the railmotor to handle the extensive milk churn traffic. A small wagon, No19, an ex MR three-plank drop-side wagon, was adapted for use with the railmotor.
However like the earlier coach the wagon proved too heavy for the limited haulage and braking power available and a special wagon was ordered from Cranes of Dereham to run with the railmotor instead. This was delivered on 21st September 1925. It had a capacity of 3 tons 10 cwt and was fitted with a three-plank body measuring 12 ft x 7 ft with sides 18 inches high. Screw couplings and side-buffers of normal height were fitted.

The railmotor with its trailers was so successful that by 1927 its mileage exceeded that of all the steam locomotives put together; which were now only needed at peak periods and for goods traffic. The summer timetable now only required the railmotor and one steam engine, the latter being used on the trains which ran through to Portishead and were therefore normally mixed because of the quarry traffic. For the same reason it was necessary to use one steam engine in winter.

Neither this nor the later railmotor were without hazards .The large railmotor was prone to slipping when the brakes were applied, particularly under wet conditions, and it was on such a day that the 3.55 from Clevedon to Weston, a train regularly filled with home going schoolchildren. On approaching Worle the car was travelling too fast to pull up. The brakes were applied but they failed to grip, and the railmotor sailed into the first crossing gate. This turned out to be not properly secured and it swung across the road, which fortunately was clear at that moment! Another drawback of the railmotors, a complaint common to contemporary road vehicles, was the propensity of the radiators to boil over. Indeed, under very hot conditions it was not unknown for the radiator to need refilling at every station, although leakage no doubt played its part, a problem also dealt with in traditional form: a handy patch of cow dung mixed with water added to the system soon did the trick.

The Large Drewry

 Meanwhile elsewhere the Southern Railway was seeking economical solutions to providing services on some of its minor branch lines. As a result, in April 1927 the General Manager instigated a review of operating these services by steam or petrol-engine railmotors. To test the latter a Drewry railmotor was ordered. There is considerable variation in reported dates of order and delivery. The Drewry Board minutes record that it had been ordered in March 1927 but Bradley (probably based on Southern records) gives June 1927. Whatever the original order date, R E L Maunsell took a personal interest in the deliberations and specifications, even over quite minor matters, seem to have changed over the months. It took till August 1927 for the Southern to harden its requirement to a four wheeled car to seat 25 and to include a guard's compartment to carry milk churns. It is an interesting speculation whether Stephens, who was friendly with both Maunsell and his General Manager, was informally consulted for his experiences during these deliberations.

The order was finally placed on 13 December 1927 for what the Southern designated a 'branch line car'. A four wheeled car with full railway buffing and drawgear, it was to carry 25 third class passengers and had a separate compartment for 28 milk churns. With a body length of 31ft and a wheelbase of 20 ft the body was far nearer normal railway practice than the earlier car, for Drewry had by then adopted a more conventional approach and suspension, radiator type and body reflected this. It was rather large for its 50hp engine, which gave a great deal of trouble in service, particularly due to vibration. Transmission was through a three-speed gearbox, and there was an electric headlight at each end, a direct reflection of the alteration made in 1927 to the WC&P motor. Delivered on 21 May 1928 it had a seating capacity of 26 and weighed 10 tons 17 cwt.

 Trial run of Large Railmotor before delivery to the SREven after all the design deliberations it failed to please.  Bradley reports that at first much trouble was met from the gearbox, but the problems actually centred on the engine which was of an outdated and inadequate Baguley design.

Bradley records that the Andover-Romsey services were taken over and worked quite satisfactorily until the extra traffic created overwhelmed the railmotor's capacity. By July 1928 he reports that it was working between Reading and Blackwater, and then in April 1929 the Appledore-New Romney-Dungeness services. But these dates seem to be, in part at least, wrong and more research is needed into the services and periods worked. During 1929 serious engine problems were encountered to the point that Drewry staff recalled that they were authorised to offer a new engine of Baguley build. However records show the original engine was modified and reconditioned at Andover in 1929. This clearly indicates that the railmotor was still on the Romsey service at that date.

Because of these problems, the Southern did not immediately take the railmotor into stock - or pay the £1850 due for it. These difficulties with the larger Baguley engines seem to have been a major factor in precipitating a split between Drewry and Baguley which occurred in March 1930 after six months notice had been given. Eventually, after the split, Drewry, worried about its reputation with the poor performance of a car so much in the public eye, fitted a Parsons M4 engine (an unusual choice of manufacturer for Drewry) which developed 64 HP from 5’’ x 6’’ cylinders which it was claimed cured all the troubles. The date of this change and another recorded change to the internal arrangements that resulted in a reduction to 22 seats is uncertain. Bradley records that a major breakdown occurred in February 1930 and when returned to traffic from Ashford Works the railmotor had been up-rated to 64 h.p, and the passenger complement reduced However records show a new water pump fitted in August 1930 and the Southern did not take final delivery from Drewry, and pay their bill, till mid 1933 which suggests a later date for the engine change.

Having now paid for the railmotor the Southern and having a reputedly reliable unit now clearly lost interest in this machine. No doubt W H Austen through his Southern contacts  had noted this, with the result that in July 1934 it was noted at Bristol en route for service on the Weston, Clevedon & Portishead Railway, a sale for £272 having be negotiated –a bargain for him and a big loss to the Southern. The railmotor then seems to have settled into a quiet revenue earning existence quite different from its development period on the Southern.

 WCP 5 with trailerAs was customary for Austen little effort was made to alter the railmotor’s appearance and its Southern livery was largely retained and even its number 5. The words ‘SOUTHERN RAILWAY’ were painted out and ‘W.C. & P’ painted over. It kept this livery until the final winter of the line when all lining disappeared. The larger railmotor’s seating accommodation was less than that of the original Drewry but it took on that vehicle's duties to a large extent and it was not uncommon to see the passenger trailer car attached to No. 5.

 Railmotor 5 at SwindonWhen traffic ceased in1940 the Great Western Railway purchased the Railway's rolling stock. The larger railmotor was marshalled in a train of WC & P carriages and travelled to Swindon on its own wheels. The original railmotor and the trailer travelled to Swindon on well wagons. The body of the larger railmotor was purchased by a Swindon girl’s school for use as a pavilion but the other vehicles were broken up for scrap.

 

Sources

The Railway Products of Baguley-Drewry Ltd and its Predecessors. A Civil & R Etherington, IRS, 2008
Locomotives of the Southern Railway Part1, D L Bradley, RCTS, 1975
The Weston Clevedon & Portishead Railway, C Redwood, Sequoia Publishing, 1981
Colonel Stephens Railmotors, S Garrett & J Scott-Morgan, Irwell Press, 1995